Previous
Next
Accessories
Solarseeker Accessories
Reactor、Power Board、Water level sensor、Booster、24V Fan and etc….
Application
Solarseeker provides a variety of accessories to keep the inverter running better and extend the lifespan of the system
| Reactor/Filter | |
| Model: | OR Series |
| Specification: | 1. For 220/380/460, three phase/single phase motor 2. For all brands pump and all brands inverter |
| Value: | Protect pump from harmonic wave, extend lifespan 30% more, especially for big power pumps and deep well projects |
| 24V Board | |
| Model: | B24 |
| Specification: | Input 170-800V DC Output 24V DC (3 sets) Power 100W Size WDH 150*130*35mm |
| Value: | Get power from inverter, no need 220 and 380V output power to fans, sensors, relays, buttons, lamp. System have simple wiring, easy operation, better cost, lower temperature, longer life. |
| Water level sensor | |
| Model: | WLS |
| Specification: | Different size from 20*20*20mm to 50*50*50mm Sensor cable connect to inverter 24V terminal Work with different logic, long cable and long lifespan Prevent sand clogging No need extra power |
| Value: | Sensor can automatically detect the well or water tank Protect inverter from dry running Let it automatically stop or start running |
| Booster | |
| Model: | SP60-90 |
| Specification: | Input: 60-90V DC Output:420-630V DC Power: for 1100W motor power Size: WDH 360*180*120mm |
| Value: | Increase solar panel Voc up to more than 420V reduce solar panel quantity and cost |
| Fan | |
| Model: | F24-12038 |
| Specification: | Input: 24V DC Power: 12W Size: WDH 120*120*38mm For: Inverter less than 11kW |
| Value: | Get 24V DC power from power board Help to reduce temperature / wiring / after sales service Increase system lifespan |
| Fan | |
| Model: | F24-17251 |
| Specification: | Input: 24V DC Power: 48W Size: WDH 170*170*51mm For: Inverter less than 11kW |
| Value: | Get 24V DC power from power board Help to reduce temperature / wiring / after sales service Increase system lifespan |
| Contactor | |
| Model: | C65 |
| Specification: | Input: 0-1000V DC Wiring: 4P Current: 65A For: Inverter 22kW and pump 18kW and below |
| Value: | Connect solar panel and inverter with max 1000V DC Disconnect panel and inverter if over current happen |
| Contactor | |
| Model: | C125 |
| Specification: | Input: 0-1000V DC Wiring: 4P Current: 125A For: Inverter 45kW and pump 37kW and below |
| Value: | Connect solar panel and inverter with max 1000V DC Disconnect panel and inverter if over current happen |
SP SERIES INTRODUCTION
MODEL DISPLAY
HOW TO CONNECT WATER LEVEL SENSOR
HOW TO CANCEL OH2
HOW TO RESET INVERTER PARAMETER
Related Products
